$249.00 - $249.99
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation
Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8120 4-piston caliper is designed for tough enduro trails - Set includes brake lever, caliper, finned metal pads, and hose - Brakes are pre-bled for convenient setup
The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads
In the world of freeride and DH, you need complete and utter faith in your brakes. You need serious stopping power with feathery modulation. So whether you're scrubbing mach 5 speeds or slowly picking your way down techy gnar, Shimano's ZEE Disc brakes have your back. This post-mount caliper is equipped with four oversize ceramic pistons for fade-free, shudder-free, and noise-free braking. One-way bleeding makes maintenance a snap, and the calipers are compatible with Shimano's ICE-Tech brake pads (sold separately).
- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment
- Entry level to the MAGURA MT world with all of the high-tech features of German engineering skill such as lightweight Carbotecture components and the improved MAGURA disctube for safe stopping on tour and in the city - suitable for mounting left or right
Shimano XT RT86 6-Bolt Disc Rotor - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes rotor fixing bolts and non-turn washers - Hub/Disc Compatibility: 6-Bolt Disc - Weight: 173 g - Rotor Size (mm): 203 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds
$55.99 - $67.99
Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads
$54.99 - $59.99
The D-Series rotor was developed in conjunction with the new Dominion disc brake, designed to provide consistent and reliable stopping power under all conditions. - Proprietary friction surface, optimized for use with Hayes T106 (Semi-Met) or T100 (Sintered) pads to deliver fast, consistent burnish, predictable friction rate, and consistency across temperature and speed conditions - MRC (Modal Resonance Cancellation): Tuned to cancel resonance and vibration, particularly when paired with Hayes T106 (Semi-Met) and T100 (Sintered) pads - 1.95mm thickness enhances heat dissipation - Includes mounting hardware
$45.00 - $59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline
$44.00 - $59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts
With a focus on reduced weight and cross-country tuned stopping power, the Shimano Deore XT BL-M8100 levers provide intuitive modulation so that you can explore your limits with confidence. They feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional contact point. - 10% stiffer than previous generation M8000, even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band
$44.00 - $55.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$37.99 - $51.99
Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring
Magura Storm SL.2 Rotor - 6-bolt silver The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.
$40.00 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
MX-Comp brakes are powerful, low maintenance mechanical disc brakes for long pull brake levers. - Torsion Spring internals for low effort, more efficient braking - Body design and lever arm for improved stiffness and lower weight - New improved pads offer quiet braking with great performance - Ball and ramp actuation - Includes rotor
Magura Storm CL Disc Brake Rotor - Centerlock with lockring for thru axle
$32.99 - $45.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade
8 Series Disc Brake Pads - Disconnected two piece back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Set of four disc brake pads for one MT5, MT7 Caliper
Peacemaker Brake Lever Clamp—For Dominion / Shimano I-Spec II
$35.00 - $40.00
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
$29.99 - $39.59
Origin-8's Pro Pulsion Classic Road Caliper offers excellent braking power for road bikes. A dual pivot design provides solid stopping power and the forged aluminum construction keeps the weight low. A variety of reaches ensure proper fitment and the vast array of colors and finishes let you match your ride, or add an accent.
$16.50 - $37.79
- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair
Magura mdr-c disc brake rotor - 203mm 6-bolt for ebike silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design
$17.99 - $36.99
Put supreme control right at your fingertips with Shimano's Deore Two-Finger V-Brake Levers. Ergonomic lever blades are comfortable and easy to use. The internal bumber offers silent lever return, and the reach can be adjusted to fit your hands.
Page 1 of 3 Next page