Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$13.55 - $320.75
We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.
$13.55 - $320.75
Dumonde Tech worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X REGULAR Bicycle Chain Lubricant Everyone who has tested or raced using PRO X reports that performance is better than any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X REGULAR brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little effort is used to move your bike parts. - 10 times higher lubricity than Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, lasts longer, and runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to our PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross, and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, used sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions.
$299.99
Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps
$279.95
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"
$219.95
Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included disc brake-compatible rear rack.
$209.95
Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included rack.
$189.99
No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps
$175.00
SMARTER VISION Aside from outstanding lumen capacity and industry-leading usage time, the Recon HL1800 monitors ambient light to change output accordingly, helping to save battery power for when you need it. Shines brighter, runs longer and works smarter. FEATURES - Smart Mode light sensor monitors ambient light to adjust light output accordingly - The Recon 1800 can pair with ANT+ compatible computers to view battery information on the computer screen.* - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount - *Giant recommends operating the HL1800 in manual mode when using Garmin computers. SPECIFICATIONS - Size: 103x32x47mm - Weight: 190g without mount - Colors: Black - Output: 1800 lumens - Runtime: High (1800LM) 1.5hrs, Middle 3.5hrs (900LM), Low 7hrs (450LM), Smart (100LM>450LM with flash output in Day) 40hrs; (900LM with steady output at Night) 3.5hrs, Flash (100LM) 65hrs - Battery: Li-Ion polymer battery (6400mAh) - Water resistance: IPX6 - Certifications: ANSI-Standard FL-1
$166.99
- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger
$160.00
POWER COUPLE Perfect for the serious road or mountain biker to use under any conditions, the Recon HL 1100 combines outstanding lumen capacity with industry-leading usage time and monitors ambient light to change output accordingly while the powerful TL 200 ensures your visibility at all times. HL 1100: - Smart Mode light sensor monitors ambient light to adjust light output accordingly - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount TL 200: - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility
$150.00
Made to haul all the gear you need—but flexible enough to slim down for shorter rides—the Raptor 14 is our premium pack for mountain bikers who demand top quality from their gear. Don't like how hydration packs feel over gnarly terrain? Neither did we. So we designed shoulder straps in the shape of wings that curve the same way you do when you're in riding position. An AirScape suspension and backpanel provide a close-to-body carrying experience and elevate comfort and stability to unprecedented levels, while still allowing for dynamic body movement. An included 2.5-liter reservoir with direct-zip hose access ensures straightforward loading, while a tool roll organizes the ingredients to get you moving again should you have any trailside troubles. Standard helmets attach with our LidLock system and side compression straps will fit your full face helmet. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment - Front panel zippered stash pocket - Side compression straps double as a full face helmet carry AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability"
$140.00
Let's face it, not every ride happens the way we want it to. Your bike can break, the weather can change, and the trail may not be as well-marked as you'd like it to be. The Raptor 10 is specifically designed with these challenges in mind. A premium pack that carries it all without weighing you down, the Raptor features winged shoulder straps that contour to the shape you're in when you reach for your handlebars—delivering superior stability even when the trail turns super techy. AirScape suspension evenly distributes your load while permitting dynamic range of motion, and a mesh-covered foam backpanel leaves you well ventilated. An included 2.5-liter reservoir slides into its own dedicated compartment for fill-up simplicity, and another devoted space at the base of the pack houses a Tool Roll for your mini-pump, tire lever, hex keys, and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability
$8.50 - $132.18
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$25.00 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
$115.00
We developed the Grid Side Beacon to work in concert with front and rear lights to help you be seen from all angles. Teaming those side lights with our best-selling Dayblazer 550 front light and our Dayblazer 65 rear light gets you the Luminate 360, the most eye-catching light set in our lineup. BEING SEEN FROM ALL ANGLES HAS NEVER BEEN EASIER. We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the national highway traffic safety administration (nhtsa) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). With the luminate 360 set, being seen from all angles while cycling has never been easier. The grid side beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. While the grid side beacon can be used as a stand alone light, we believe it works best as part of our luminate 360 light set. The dayblazer 400 front light and the 65 rear, are spec'd with blitz mode to keep you bright enough to be seen, day or night. - Lithium Battery Packaged: In Product - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Number of Batteries: 4.00 - Brightness: Up to 400 lumens front, Up to 65 lumens rear, Up to 85 lumens side - Batteries Included: Batteries Included - Battery Type: Lithium Ion/Lithium Polymer - Country of Origin: China - Batteries Needed: Yes - Recharge Time: 3-hour recharge front, 2-hour recharge rear, 2 hours side - Mounting Options: Swivel mount - A rotating mount allows the light to be adjusted to center on the road! This versatile silicone mount fits handlebars from 22–35mm and can be used to strap to some helmets. - Versatile mounting system - Round seat posts, aero posts, seat stays or loops on bags/clothes (with the built-in wire clip) are all fair game for mounting the DAYBLAZER rear light thanks to its unique and reconfigurable bracket interface. - Weight: 165 grams (front 59g, rear 48g, side 58g) Run Time : - Blitz mode (front): 1 hour at 400 lumens - Low mode (front): 1.5 hours at 200 lumens - Pulse mode (front): 6 hours at 200 lumens - Strobe mode (front): 10 hours at 200 lumens - Solid mode (rear): 1 hour at 50 lumens - High flash/Strobe mode (rear): 3 hours at 65 lumens - Low flash/Strobe mode (rear): 6 hours at 35 lumens - High solid mode (side): 1.5 hours at 85 lumens - Low solid mode (side): 3 hours at 50 lumens - High flash mode (side): 3 hours at 85 lumens - Low strobe mode (side): 6 hours at 50 lumens Water Resistance: - IP-65 submersible - Ingress protection rating or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 Standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction.
$95.00 - $115.00
Available in 3 liter, 4 liter and 4.5 liter sizes the H2Pro Frame Bag is designed to store bulky items within the bike frame without altering the bike’s center of gravity or handling characteristics. Constructed with our all-new H2Tex three-layer waterproof fabric and a high-quality water and dust proof zipper, the H2Pro Frame Bag features a hidden port that allows you discrete access to the bag for charging batteries or connecting to a hydration bag. - Giant-exclusive H2Tex 3-layer waterproof material - Hidden port design, perfect for charging cables or hydration hoses - Interior storage pocket helps keep contents organized an in place - High-Quality water/dust proof zipper SPECIFICATIONS - Material: H2Tex three-layer waterproof fabric - Colors: Black - Size: 43.5 x 6 x 11.5cm (3L), 46.5 x 6 x 13cm (4L), 50 x 6 x 14 cm (XL) - Volume: 3L, 4L, 4.5L
$110.00
A great choice for commuters, the Recon HL200/TL200 kit features a high flash mode which ensures daytime visibility and automatic mode switch to steady/flash at night, allowing motorists to see you from as far away as 1km. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility
$110.00
Designed to do it all—and hold just enough gear—the Siskin 12 is a mountain biking pack with many of the high-performing features you'd expect from Osprey. The mesh-covered AirScape backpanel provides excellent ventilation and maximum range of motion—go ahead, get sendy. A LidLock attachment on the front of the pack can store a standard size helmet while side compression straps expand to hold a full face helmet. The main U-zip compartment houses organization pockets for your bike tools and room for a layer, a sandwich, or some light mountain bike padding. Rolled, soft-edge shoulder straps keep the pack stable over technical terrain and ensure no pinching points when full. A dedicated compartment holds an included 2.5-liter reservoir and zippered hipbelt pockets provide easy access to bars during the ride or a bottle opener afterwards. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability
$109.99
The Macro Drive 1300XXL is a new high-powered LED cycling light offering up to 1,300 lumens of output. It features our Tri-Focus optics, which creates a brighter center spot in a large wide-angle pattern. It’s constructed from machined aluminum and has cooling fins that optimize performance. The light is micro-USB rechargeable and it can run for up to a massive 148 hours on a full charge. A versatile strap secures it to a variety of handlebar sizes, and the 1300XXL is Remote Switch compatible. Specs - Max Lumens: 1300 - Weight: 208g - Max Runtime: 148 Hours (In Femto Mode) - Recharge Time: 3:30Hours
$109.99
• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box
$104.99
Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. LUMINA™ MICRO 900 FEATURES - Lumen Output: 900 - 5 Modes with Run Times: 2:00 – 60:00h - Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA - Weight: 130g - Low Battery Indicator and Micro USB Rechargeable - Water / Dust Resistant IP64 Rated LUMINA™ MICRO 900 RUN TIMES Low - 11:00h at 200 Lumens Med - 4:30h at 450 Lumens High - 2:00h at 900 Lumens Flash - 11:00h at 900 Lumens Walk - 60:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in the last mode used) Vmax+™ 150 RUN TIMES Fast Flash - 11:30h Slow Flash - 9:30h Disco Flash - 9:45h Pulse Flash - 6:00h High Steady - 4:30h Low Steady - 25:30h Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold the power button for 8-10 seconds to lock/unlock.
$94.99 - $99.99
Fender set with flexible spoiler It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-around protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid, and protected against corrosion. New V adapter with ESC security system With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts. - Aluminum/plastic sandwich construction - With a flexible spoiler - V-adapter with ESC safety system - Stable double U-struts - Made in Germany
$99.95
A revolutionary hydration hip pack with the ReTrakt hose system to easily secure the drink tube while keeping your eyes on the trail. - Locate and replace the hydration hose without taking your eyes off the trail using the patented ReTrakt magnetic hose retention - Includes 1.5L hydration reservoir - One-handed, behind the back access to a phone in the soft, structured pocket - Ride in comfort and descend with confidence with superior stability and breathable materials - Organize tools and clothing accessories in interior pockets - Quickly access nutrition with side jersey pockets - Store additional small items in the front flap - Stay visible with a blinky-light attachment loop
$98.00
The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. - Kit includes 2 syringes, fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and DOT5.1 hydraulic fluid - For use with SRAM X0/ XX/ Guide/Level/Code/HydroR/G2 disc brakes - Compatible with DB-G2-R-A1, DB-G2-R-A2, DB-G2-RE-A2, DB-G2-RS-A1, DB-G2-RS-A2, DB-G2-RSC-A1, DB-G2-RSC-A2, DB-G2-ULT-A1, DB-G2-ULT-A2, DB-GDE-R-A1, DB-GDE-R-B1, DB-GDE-RE-A1, DB-GDE-RS-A1, DB-GDE-RS-B1, DB-GDE-RSC-A1, DB-GDE-RSC-B1, DB-GDE-T-A1, DB-GDE-ULT-A1, DB-LVL-A1, DB-LVL-T-A1, DB-LVL-TL-A1, DB-LVL-TLM-A1, DB-LVL-TLM-B1, DB-LVL-ULT-A1, DB-LVL-ULT-B1, DB-X0-B1, DB-XX-A2
$95.00
RIDE FREE Ditch the heavy pack and saggy saddlebag with the all-new Clutch Crank Storage. Lightweight and right there when you need it with six allens, a chain tool, and a spoke wrench, the Clutch Crank Storage can solve just about any trail-side mechanical. FEATURES: - The smallest multi-function crank-stored tool on the market - Magnetic locking system ensures quiet, stable storage - Quickly and easily mounts in hollow crank spindle - Compatible with hollow-spindle SRAM, Shimano, and Praxis cranks - Includes 2.5 to 6mm allens, a T25 Torx, a valve core remover, spare chain links, and a spoke wrench SPECIFICATIONS: - Tools: 2.5, 3, 4, 5, 6mm Hex, T25, Chain breaker, Spare chain links storage, Spoke wrench - System: Compatible with Sram & Shimano & Praxis Cranks - Sizes: 100x 32 x 19mm (TBC) - Weight: 84g - Material: High-density plastic
$95.00
- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified
$90.00
Training, racing, and more. The Duro 1.5 is a svelte hydration companion perfect for training runs, long races, or streamlined days in the mountains. While it may be the smallest volume vest-pack in this series, it will carry you further than you ever imagined. With a body-hugging fit that provides bounce-free carry, smart and accessible organization for fuel and gear, and an included Hydraulics LT 1.5L reservoir that can be supplemented with soft flasks, the Duro 1.5 helps you focus on what matters most: continuous forward motion. BUILT FOR SPEED - Vest-pack fit provides bounce-free stability and purpose-built for incredible comfort so you can focus on FKT's and PR's. HYDRATION INCLUDED - Bottles, reservoirs, and add-on flexibility for short runs, long runs, and everything in between. You decide what you need. Duro/Dyna makes it possible. EASY GEAR ACCESS - Pockets up front for quick access to fuel and soft flasks, trekking pole storage when you need to use your hands as much as your feet to move forward, and room for rain gear and extra layers. FULL AIRMESH BACKPANEL - Breathable mesh wrap with soft, irritation-free contact surface BODY WRAP HARNESS - Adjustable and removable dual chest straps for stability - Front harness gear- and food-organization pockets - Breathable mesh wrap with soft, irritation-free contact surface - Die-cut EVA foam for larger loads FULL AIRMESH HIPBELT - Mesh-covered, perforated foam harness - Modified straight ErgoPull hipbelt closure - Zippered stretch-mesh bodybelt pockets - Seamless integration with vest-pack-style fit - Included Osprey Hydraulics 1.5 LT reservoir with QuickConnect and sternum-strap magnet for bite valve - Front panel zippered internal reservoir sleeve - Front panel zippered slash pocket - Accessible dual lower side panel zippered stretch-mesh pocket - Lower stabilizing/expansion compression straps - Snap-in adjustable/removable dual chest straps for customized stability - Vertical zippered harness slash pocket for valuables or phone - Dual extra-large stretch-mesh soft flask/food harness pockets - Dual lower stretch-mesh food/supplement harness pockets - Trekking pole attachment - Tuckaway safety whistle - S/M [34-40" / 86-102cm] M/L [39-45" / 99-114cm]—chest measurements
$90.00
Prefer an off-the-back hydration solution instead of an over-the-shoulder pack? The Seral 7 lumbar pack was made for you. Featuring an included 1.5-liter lumbar reservoir and magnetic bite valve that attaches to the hipbelt for easy access. Some lumbar packs have a tendency to creep around while you ride, we promise this one won't. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. A zippered main compartment and hipbelt pockets fit your spare tube, patch kit, CO2 inflator and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Easily accessible zippered front pocket with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
$85.00
- Protextura Water Resistant Nylon Keeps Contents Safe And Dry - Multiple Pockets Help Organize Essentials Including A Computer Sleeve That Fits Laptops Up To 15 Inches - Convenient Built-In Pull-Out Rain Cover - Reflective Strip And Taillight Hanger Provides Optimal Visibility And Safety - Quick Release System For Easy Attachment And Removal To Most Bike Racks
$84.99
The Cane Creek Double Barrel Air Digital Shock Pump offers a digital display and zero-loss air valve to provide the most accurate pressure on both forks and rear shocks. Laser etching on the body allows you to precisely measure sag, the most important step in setting up an air-sprung suspension. - Max 300 PSI - 285mm length - Digital gauge - Rotating hose - Zero-loss air valve - Dual stage release for zero air loss
Page 1 of 13 Next page