Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

iSSi Cleat Set
$17.99
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
iSSi Flip I
$60.00
There’s no need to choose between clipless performance and platform versatility with iSSi Flip pedals. Go clipless on the commute or sport a pair of clogs around campus. - Compatible with SPD pedals & cleats - Compatible with two-bolt style shoes - Clipless on one side, platform on the other
iSSi Flip II Pedals
$80.00
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch
iSSi Keo Compatible Cleat
$25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
iSSi Thump (Molded Pins, Small)
$36.00
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 113 x 95mm
iSSi Thump (Replaceable Pins)
$50.00
Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and comfort - Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height. - Platform size: 119 x 99mm
e*thirteen by The Hive APS Adjuster Hardware Kit
$19.95
- Replacement APS Adjuster hardware for e*thirteen cranks - For LG1 and TRS series aluminum arm cranks
absoluteBLACK Oval 104 BCD 4-Bolt Chainring
$74.99 - $78.99
absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible
absoluteBLACK Oval 96 BCD Asymmetric Chainring for Shimano XT M8000/SLX M7000
$78.99
absoluteBLACK Oval 96 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for use with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks only. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks - Chainrings fit boost and non-boost bikes, as correct offset is realized by the crank spider itself, not chainring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Chainrings have built-in standoffs to provide the ideal 1X chainline - For 49mm chainline - Only use the included extra-long chainring bolts
absoluteBLACK Oval Direct Mount Chainring for CINCH 3mm Offset
$67.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)
absoluteBLACK Oval Direct Mount Chainring for SRAM 3-Bolt 0mm Offset
$67.99
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 0mm offset is designed for 157 Super Boost spacing on standard DUB/GXP/long-spindle BB30, as well as 135/142 spacing on short-spindle BB30 cranks - Fits Super Boost SRAM XX1, XX1 Eagle, X01, X01 Eagle, X0, X9, X7, S2210, S1400, and Truvativ AKA cranks, as well as fat bikes with GXP spindle
absoluteBLACK Oval Direct Mount Chainring for SRAM 3-Bolt 3mm Offset
$67.99
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks - Designed for GXP, DUB, and long-spindle BB30 cranks
absoluteBLACK Oval Direct Mount Chainring for Shimano Hyperglide+
$88.95
absoluteBLACK Oval Direct Mount 1x Chainrings for Shimano greatly improve traction and climbing abilities. They are designed for Shimano XTR M9100, XT M8100, and SLX M7100 cranks and will only work with 12-speed Hyperglide+ chains. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - This chainring will only work with Shimano CN-M9100, 8100, & 7100 Hyperglide+ chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio
Zipp Bearing Kit: For Rear 188 V9 Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings
Zipp Tangente Platinum Pro Evo Brake Pads
$40.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
X-Fusion X-Fusion Seatpost Seal Kit
$25.00 - $40.00
X-Fusion's Seal Kits have what you need to freshen up your dropper post and keep dirt out. - 25mm Kit is for posts with 25mm shafts and fits all Hilo posts with 125mm travel except for SL and Strate - 22mm Kit is for posts with 25mm shafts and fits 27.2mm models and 1st generation Hilo posts with 100mm travel in 30.9 and 31.6mm diameters - SL Kit fits SL dropper posts only - Strate Kit fits Strate dropper posts only
Wolf Tooth Components 16 Tooth Cog
$15.95
We did our homework on this cog and we think you will be pleased with the result! This 16t cog smooths out the cog to cog transition when using our GC and a standard 10 speed 11-36 cassette. You should expect this to shift well and last as long as the rest of your cassette cogs of similar size. Here are the transitions WITHOUT the 16t cog (4 tooth max jump): - Remove the 15t -> 11-13-17-19.... - Remove the 17t -> 11-13-15-19... Here are the transitions WITH the 16t cog (3 tooth max jump): - Remove 15t & 17t-> 11-13-16-19... Compatibility: Shimano 10 speed cassettes - XT 11-36t (CS-M771) - XTR 11-36t (CS-M980) - Other 11-36t Shimano cassettes like SLX HG81 11-36t - Modification required (must drill out rivets holding the 17t to the larger cogs) SRAM 10 speed cassettes - PG 1030, 1050, and 1070 - 11-36 and 12-36 - X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$69.95 - $79.95
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components Direct Mount Chainrings for SRAM Cranks
$69.95 - $79.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Wolf Tooth Components Elliptical Direct Mount Boost Chainrings for SRAM Cranks
$69.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components ReMote Dropper Post Lever
$69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Wheels Manufacturing Inc. Derailleur Hanger 142
$29.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 162
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 163
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 167
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws
Wheels Manufacturing Inc. Derailleur Hanger 168
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 169
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x12 Flat Head Screw, (1) M4x12 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 171
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 176
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 199
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Page 1 of 15 Next page